ISO INTERNATIONAL STANDARD 13184-3 First edition 2017-12-01 Intelligent transport systems (ITS) - Guidance protocol via personal ITS station for advisory safety systems - Part 3: Road guidance protocol (RGP) conformance test specification Systemes intelligents de transport - Protocole d'orientation par station ITS personnelle pour systemes a avis de sécurité Partie 3: Specification d'essai de conformité du protocole d'orientation routiere Reference number ISO 13184-3:2017(E) OSI @ IS0 2017 IS0 13184-3:2017(E) COPYRIGHT PROTECTED DOCUMENT @ IS0 2017, Published in Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized otherwise in any form writtenpermission.Permission canberequestedfromeitherIsOattheaddressbelow orIso'smemberbodyinthecountryof the requester. ISO copyrightoffice Ch. de Blandonnet 8 . CP 401 CH-1214 Vernier, Geneva, Switzerland Tel. +41 22 749 01 11 Fax +41 22 749 09 47 [email protected] www.iso.org ii @ IS0 2017 - All rights reserved BSISO13184-3:2017 IS0 13184-3:2017(E) Contents Page Foreword ..vi Introduction. ..vii 1 Scope. 2 Normative references 3 Terms and definitions 4 Abbreviated terms 5 Conventions ..2 6 Conformance test basic principles and clustering ..2 6.1 Basic principles for conformance test case definition .2 6.2 Test case structure .3 6.2.1 Conformancetestcase Generalstructure 3 6.2.2 Test result criteria.... 6.3 Conformance test clustering .4 6.3.1 General. ..4 6.3.2 Main conformance test case clusters. .4 7 CT cluster 1 - Check crossroads with a traffic signal RGP implementation ..5 7.1 [RGP-CT_UC.1.1] - Vehicle violates a signal without stopping. ..5 7.1.1 Overview. .5 7.1.2 Test purpose ..5 7.1.3 Configuration .5 7.1.4 Preamble (setup state) .5 7.1.5 Test execution. ..6 7.1.6 Preamble (setup state) .6 7.2 [RGP-CT_UC.1.2] — Violating vehicle is inside the crossroads .6 7.2.1 Overview.. ..6 7.2.2 Test purpose 7.2.3 Configuration .6 7.2.4 Preamble (setup state) .6 7.2.5 Test execution. .6 7.2.6 Postamble.. ..7 7.3 [RGP-CT_UC1.4] - Pedestrians violate the traffic signal on a pedestrian crossing 7 7.3.1 Overview .7 7.3.2 Test purpose ..7 7.3.3 Configuration .7 7.3.4 Preamble (setup state) .7 7.3.5 Test execution.. .7 7.3.6 Postamble. 7.4 [RGP-CT_UC1.5] - Traffic is bumper to bumper on the crossroads. .8 7.4.1 Overview .8 7.4.2 Test purpose ..8 7.4.3 Configuration ..8 7.4.4 Preamble (setup state) .8 7.4.5 Test execution. .8 7.4.6 Postamble.. .9 8 CT cluster 2 Check crossroads RGP implementation .9 8.1 [RGP-CT_UC2.1] - Crossroads without a traffic signal .9 8.1.1 Overview.... 8.1.2 Test purpose .9 8.1.3 Configuration ..9 8.1.4 Preamble (setup state) 9 8.1.5 Test execution. .9 @ IS0 2017 - All rights reserved ii