ISO INTERNATIONAL STANDARD 16063-33 First edition 2017-10 Methods for the calibration of vibration and shock transducers Part 33: Testing of magnetic field sensitivity Méthodes pour I'étalonnage des transducteurs de vibrations et de chocs- Partie 33: Essai de sensibilité aux vibrations transversale Reference number IS0 16063-33:2017(E) [so IS0 2017 IS0 16063-33:2017(E) Contents Page Foreword iv 1 Scope 2 Normative references, 3 Terms and definitions. 1 4 Uncertainty of measurement 5 Requirements for apparatus 5.1 General 5.2 Magnetic field sensitivity tester 5.3 Conditioning amplifier 5.4 Voltmeter.. 5.5 Teslameter. 6 Ambient conditions 7 Method 7.1 Apparatus setup. 7.2 Adjusting test magnetic field. 7.3 Mounting transducer. 7.4 Test procedure.. 7.5 Expression of results Annex A (informative) Automatic test system of magnetic field sensitivity. Annex B (informative) Alternative procedure with three orthogonal coils @ IS0 2017 - All rights ii IS0 16063-33:2017(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (Iso member bodies). The work of preparing International Standards is normally carried out through Iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non-governmental, in liaison with IsO, also take part in the work. ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization. The procedures used to develop this document and those intended for its further maintenance are described in the ISO/IEc Directives, Part 1. In particular, the different approval criteria needed for the different types of IsO documents should be noted. This document was drafted in accordance with the editorial rules of the IsO/IEc Directives, Part 2 (see wwwiso.org/directives). Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. IsO shall not be held responsible for identifying any or all such patent rights. Details of any patent rights identified during the development of the document will be in the Introduction and/or on the Iso list of patent declarations received (see wwwiso.org/patents). Any trade name used in this document is information given for the convenience of users and does not constitute an endorsement. For an explanation on the voluntary nature of standards, the meaning of IsO specific terms and expressions related to conformity assessment, as well as information about Iso's adherence to the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT), see the following URL: Www.iso.org/iso/foreword.html This document wast preparedEbystTechnicalfrCommitteerdsO/Tcng108,oMechahical cbibration, shock and condition monitoring, Subcommittee Sc 3, Use and calibration of vibration and shock measuring instruments, This second edition cancels and replaces the first edition (IS0 5347-19:1993), which has been technically revised. A list of all the parts in the IS0 16063 series can be found on the IS0 website. iv