BS EN IS0 24342:2018 BSl Standards Publication Resilient and textile floor-coverings : Determination of side length, edge straightness and squareness of tiles (Is0 24342:2018) bsi. BRITISH STANDARD BS EN IS0 24342:2018 National foreword This British Standard is the UK implementation of EN IS0 24342:2018. It supersedes BS EN IS0 24342:2012+A1:2012 and BS EN 994:2012, which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/60, Resilient and Laminate Floor Coverings. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @ The British Standards Institution 2018 Published by BSI Standards Limited 2018 ISBN 978 0580 963667 ICS 97.150 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2018 Amendments/corrigenda issued since publication Date Textaffected EUROPEAN STANDARD EN IS0 24342 NORME EUROPEENNE EUROPAISCHE NORM December 2018 ICS 97.150 Supersedes EN 994:2012, EN IS0 24342:2012 English Version Resilient and textile floor-coverings - Determination of side length, edge straightness and squareness of tiles (IS0 24342:2018) Revetements de sol resilients ou textiles Elastische und textile Bodenbelage - Bestimmung - Détermination de la longueur des bords, der Kantenlange, Rechtwinkligkeit und de la rectitude des aretes et de I'equerrage Geradheit von Platten (IS0 24342:2018) desdalles (IS024342:2018) This European Standard wasapproved by CEN on 4November 2018. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centrehasthesamestatus astheofficialversions. CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, TurkeyandUnitedKingdom. EUROPEAN COMMITTEE FOR STANDARDIZATION COMITEEUROPEENDENORMALISATION EUROPAISCHESKOMITEEFURNORMUNG CEN-CENELEC Management Centre: Avenue Marnix 17,B-1000 Brussels @2018CEN All rights of exploitation in any form and by any means reserved Ref.No.EN ISO 24342:2018: E worldwide for CEN national Members