BS IS013956:2010 BSl Standards Publication Plastics pipes and fittings - Decohesion test of polyethylene (PE)saddlefusion joints - Evaluation of ductility of fusion joint interface bytear test BSi raising standards worldwide" BS ISO 13956:2010 BRITISH STANDARD National foreword This British Standard is the UK implementation of IS0 13956:2010 The UK participation in its preparation was entrusted to Technical Committee PRI/88/4, Test Methods - Plastic Piping. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. @BSI2010 ISBN9780580625817 ICS 23.040.60 Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2010. Amendments issued since publication Date Text affected BS ISO 13956:2010 INTERNATIONAL ISO STANDARD 13956 First edition 2010-10-01 Plastics pipes and fittings Decohesion test of polyethylene (PE) saddle fusion joints E Evaluation of ductility of fusion joint interface by tear test Tubes et raccords en matieres plastiques - Essai de décohésion des selles en polyéthylene (PE) assemblees par soudageEvaluation de la ductilite del'interface de soudageparessaid'arrachement Reference number ISO 13956:2010(E) @ISO 2010