BS EN ISO BRITISH STANDARD 15614-11:2002 Specification and qualification of welding procedures for metallic materials Welding procedure test- correct Part 1l: Electron and laser beam welding Version London of Holloway Royal copy: icensed The European Standard EN IS0 15614-11:2002 has the status of a British Standard ICS 25.160.10 BSI NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BS ENIS0 15614-11:2002 National foreword This British Standard is the official English language version of EN ISO 15614-11:2002.It is identical with ISO 15614-11:2001. The UK participation in its preparation was entrusted to Technical Committee WEE/36, Approval testing of welding procedures and welders, which has the responsibilityto: aid enquirers to understand the text; present to the responsible European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests S of 14 Jan 2023. informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Version correct as Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled International Standards Correspondence Index", or by using the “Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, pages 2 to 28, an inside back cover and a back cover. The BSI copyright date displayed in this document indicates when the documentwaslastissued. This British Standard, having been prepared underthe direction of the Engineering Sector Policy and Strategy Committee, was published Amendments issued since publication under the authority of the Standards Policy and Strategy Committeeon28March2002 Amd. No. Date Comments CBSI28March2002 ISBN 0 580 37646 X EN ISO 15614-11 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM March 2002 ICS25.160.10 Englishversion Specification and qualification of welding procedures for metallic 14 Jan 2023. materials - Welding procedure test - Part 11: Electron and laser beam welding (ISO 15614-11:2002) Descriptif et qualification d'un mode operatoire de soudage Anforderung und Qualifizierung von SchweiBverfahren fur sof pour ies materiaux metalliques - Epreuve de qualification metallische Werkstoffe - SchweiBverfahrensprufung - Teil d'un mode opératoire-Partie11:Soudageparfaisceau 11:Elektronen-und LaserstrahlschweiBen(ISO15614 d'électrons et par faisceau laser (IsO 15614-11:2002) 11:2002) Version correct This European Standard was approved by CEN on 2 May 2001. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Management Centre or to any CEN member. London. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official versions. 0. University CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom. Licensed copy: Royal Holloway EUROPEANCOMMITTEE FOR STANDARD