BS ISO BRITISH STANDARD 69:1998 Cinematography - 16 mm motion-picture and magnetic film - Cutting and perforating dimensions ICS 37.060.20 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BS ISO69:1998 National foreword This British Standard reproduces verbatim ISO 69:1998 and implements it as the UK national standard. It supersedes BS 5550-2.1.1:1993 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee CPW/36, Cinematography, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index", or by using the “Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and ii, the ISO title page, pages ii to iv, pages 1 to 4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. This British Standard, having been prepared under the Amendments issued since publication direction of the Consumer Products and Services Sector Amd. No. Date Comments Board, was published under the authority of the Standards Board and comes into effect on 15 September 1998 BSI 04-1999 ISBN0580299279 BS ISO69:1998 Contents Page National foreword Inside front cover Foreword ili Text of ISO 69 1 C BSI 04-1999 i