ISO INTERNATIONAL STANDARD 8566-4 First edition 1998-02-15 Cranes Cabins - Part 4: Jib cranes Appareils de levage a charge suspendue - Cabines - Partie 4: Grues a fleche ISO Reference number ISO 8566-4:1998(E) se with Not for Resale ISO 8566-4:1998(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standards is normally carried out through isO technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, governmental and non- governmental, in liaison with ISO, also take part in the work. IsO collaborates closely with the International Electrotechnical Commission (lEC)onallmattersofelectrotechnicalstandardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. ISO/TC 96, Cranes, Subcommittee SC 8, Jib cranes. IsO 8566 consists of the following parts, under the general title Cranes Cabins: Part 1: General Part 2: Mobile cranes 一 Part 3:Tower cranes Part 4: Jib cranes Part 5: Overhead travelling and portal bridge cranes @ISO1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. InternationalOrganizationforStandardization Case postale 56 · CH-1211 Geneve 20 · Switzerland Internet [email protected] X.400 C=ch; a=400net; p=iso; o=isocs; S=central Printed in Switzerland license from IHS Not for Resale INTERNATIONALSTANDARD @ISO ISO 8566-4:1998(E) Cranes Cabins - Part 4: Jib cranes 1 Scope This part of IsO 8566 specifies the requirements for cabins for jib cranes as defined in ISO 4306-1. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of IsO8566.Atthetimeofpublication,theeditionsindicatedwerevalid.Allstandardsaresubjecttorevision,anc parties to agreements to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and ISO maintain registers of currently valid International Standards. IsO 4306-1:1990, Cranes—Vocabulary—Part 1:General. ISO 7752-1:1983, Lifting appliances — Controls — Layout and characteristics — Part 1: General principles. IsO 7752-4:1989, Cranes — Controls — Layout and characteristics - Part 4: Jib cranes. ISO 8566-1:1992, CranesCabins—Part 1: General. 3 Construction of the cabin insidebreadth1000 mmandtheminimum insidedepth1500 mm(seefigure1). The minimum total internal volume of the cabin shall be 3,1 m3. In determining the volume and dimensions. allowance shall be made for the number of persons working in the cabin, the working time actually spent and the 3.4 To facilitate maintenance activities, an electric socket shall be provided in the cabin. CopyrightInternationalOrganizationforStandardization Not for Resale