ISO INTERNATIONAL STANDARD 8759-2 Second edition 1998-03-15 Agricultural wheeled tractors Front-mounted equipment - Part 2: Stationary equipment connection Tracteurs agricoles a roues - Equipement monte a I'avant- Partie 2: Dispositif de liaison des équipements fixes ISO Referencenumber ISO 8759-2:1998(E) No r py IHS under lic itted without license from IHS Not for Resale ISO 8759-2:1998(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas liaison with ISO, also take part in the work. iSO collaborates closely with the International Electrotechnical Commission(lEC)onallmattersofelectrotechnicalstandardization. Publication as an International Standard requires approval by at least 75 % of the member bodies casting a vote. International Standard ISO 8759-2 was prepared by Technical Committee ISO/TC 23, Tractors and machinery for agriculture and forestry, Subcommittee SC 4, Tractors. This second edition of ISO 8759-2 is a complement to ISO 8759-1:1998, which is itself a technical revision of ISO 8759:1985 and ISO 8759-2:1985. equipment: Part 1: Power take-off and three-point linkage Part 2: Stationary equipment connection @ISO1998 nternationalOrganizationforStandardization Case postale 56 · CH-1211 Geneve 20 · Switzerland Internet X.400 C=ch; a=400net; p=iso; 0=isocs; S=central Printed in Switzerland onal Organization for Standardizatio INTERNATIONAL STANDARD @ ISO ISO 8759-2:1998(E) Agricultural wheeled tractors Front-mounted equipment - Part 2: Stationary equipment connection 1 Scope This part of isO 8759 specifies dimensions and requirements of the stationary equipment connection for agricultural It is applicable to the tractor categories defined in ISO 730-1 NOTE - ISO 8759-1 specifies requirements for the power take-off and the front three-point linkage. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this part of IsO 8759. At the time of publication, the editions indicated were valid. All standards are subject to revision, and most recent editions of the standards indicated below. Members of IEC and IsO maintain registers of currently valid International Standards. and 4. point linkage. 3 Definitions For the purposes of this part of ISO 8759, the following definitions and the definitions given in ISO 730-1 and ISO 8759-1 apply. 3.1 stationary equipment equipment that is powered by the power take-off of a parked agricultural tractor EXAMPLES Pond aerators, grain elevators, irrigation pumps. 3.2 stationary equipment connection element of the tractor which provides the primary rigid connection between the front of the tractor and the stationary equipment, intended only for providing a rigid connection to stationary equipment and for incidental manoeuvring of agricultural operations Copyright Intern nal Organization for Standardizatior Not for Resale