ISO INTERNATIONAL 10599-1 STANDARD First edition 1992-11-01 Car radios -- Coaxial aerial connectors Part 1: Dimensions Autoradios -- Raccords coaxiaux d'antenne - Partie 1: Dimensions Reference number ISO 10599-1:1992(E) ISO 10599-1:1992(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (IsO member bodies). The work of preparing International Standards is normally carried out through iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. international organizations, govern- mental and non-governmental, in liaison with iso, also take part in the work. Iso collaborates closely with the International Eiectrotechnical Commission (IEC) on all matters of electrotechnicai standardization. Draft International Standards adopted by the technical committees are bodies casting a vote. International Standard Iso 10599-1 was prepared by Technical Commit- tee ISO/TC 22, Road vehicles. Iso 10599 consists of the following parts, under the general title Car ra- dios --- Coaxial aerial connectors: Part 1: Dimensions Part 2: Characteristic values, performance requirements and tests ISO1992 All rights reserved. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfim, without permission inwriting fromthe publisher. International Organization for Standardization Case Postale 56: CH-1211 Geneve 20· Switzerland Printed in Switzerland 11 ISO 10599-1:1992(E) INTERNATIONAL STANDARD Car radios -- Coaxial aerial connectors Part 1: Dimensions Details of the aerial connector not specified are left Scope 1 to the manufacturer. This part of isO 10599 lays down dimensional The design of the plug shall ensure that, when specifications of the plug and socket for the coaxial making the connection, the outer contacts and the aeriai connector of car radios for mounting in road plug housing are centred before the pin comes into vehicles. contact with the tube of the socket. The connector shall meet the performance require- Normative reference 2 ments in ISO 10599-2. The foilowing standard contains provisions which. Plug 3.2 through reference in this text, constitute provisions of this part of isO 10599. At the time of publication Requirements for the aerial connector plug shall be the edition indicated was valid. Ail standards are as shown in figure 1. subject to revision, and parties to agreements based on this part of isO 10599 are encouraged to investi- 3.3 Socket gate the possibility of applying the most recent edi- tion of the standard indicated below. Members of Requirements for the aerial connector socket shall IEC and isO maintain registers of currently valid be as shown in figure 2. International Standards. 4 Designation iso 10599-2:--1, Car radios --- Coaxial aerial connec- tors --. Part 2: Characteristic values, performance An aerial connector plug which meets the require- requirements and tests. ments of this Internationa! Standard shall be desig- nated: Dimensions 3 Plug IsO 10599 3.1 Genera! An aerial connector socket which meets the re- quirements of this International Standard shall be The aerial connector shall meet the dimensional designated: specifications shown in figures 1 and 2 to ensure interchangeability. Socket 1s0 10599 1) To be published. 1