2341 International Standard (TSO INTERNATIONAL ORGANIZATION FOR STANDARDIZATION·MEXAYHAPOAHAH OPrAHM3ALWA HIO CTAHAAPTW3ALWWOORGANISATION INTE RNATIONALE DE NORMALISATION Clevis pins with head Axes d'articulation avec tete Second edition - 1986-11-01 UDC 621.886.11 Ref. No. ISO 2341-1986 (E) ISO 2341-1986 (E) Descriptors : fasteners, pins (mechanics), hinge pins, specifications, dimensions, designation. Price based on 4 pages Foreword ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standards is normally carried out through iso technical committees. Each member body interested in a subject for which a technical committee has been established has the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with IsO, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the IsO Councit. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 2341 was prepared by Technical Committee ISO/TC 2, Fasteners. This second edition cancels and replaces the first edition (IsO 2341-1972), of which it constitutes a technical revision. Users should note that ali International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. ? International Organization for Standardization, 1986 Printed in Switzerland ISO 2341-1986 (E) INTERNATIONAL STANDARD Clevis pins with head 1Scope and field of application This International Standard specifies the characteristics of clevis pins with head, with metric dimensions and nominal diameters, d, from 3 to 100 mm inclusive. References 2 ISO1234,Splitpins-Metricseries. Iso 2081, Metallic coatings - Electroplated coatings of zinc on iron or steel. Iso 3269, Fasteners - Acceptance inspection. Iso 4520, Chromate conversion coatings on electroplated zinc and cadmium coatings.