ISO INTERNATIONAL STANDARD 5614 First edition 1988-06-01 INTERNATIONALORGANIZATIONFORSTANDARDIZATION ORGANISATIONINTERNATIONALEDENORMALISATION MEXKAYHAPOAHAA OPIAHM3ALMA O CTAHAAPTM3ALMM Locked coil wire ropes for mine hoisting -- Technical delivery requirements Cables d'extraction clos utilises dans les mines - Conditions techniques de reception Referencenumber ISO 5614: 1988 (E) Copyright No reproduction or networking permitted without I Not for Resal ISO5614:1988(E) Foreword Iso (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standardsisnormally carried outthroughISOtechnicalcommittees.Eachmember the right to be represented on that committee. International organizations, govern- mental and non-governmental, in liaison with iso, also take part in the work. Iso collaborates closely with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization the member bodies for approval before their acceptance as International Standards by the iso Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 5614 was prepared by Technical Committee ISO/TC 82, Mining. Users should note that all International Standards undergo revision from time to time and that any reference made herein to any other International Standard implies its latest edition, unless otherwise stated. InternationalOrganizationforStandardization,1988 Printed in Switzerland Copyright Intermational Organization for Standardization No reproduction or networking permited without icense from IHS Not for Resale ISO5614 :1988 (E) Contents Page Scope and field of applicatior 2 References Components of the rope 3.1 Wires 3.2 Lubricants. 3.3 Construction 3.4 Wire tensile grades 4Requirements 4.1Requirementsforthecompletedrope. 4.2Requirements for round wires from rope 4.3Requirements for shaped wires from rope . 5 Testing. 5.1Tests on the completed rope 5.2Tests on wires from the rope 5.3 Independent tests 6 Inspectionfacilities Certificates. 8 7.1 General 7.2 Works certificate . 8 7.3 Fullworkscertificate 7.4 Certificateofacceptance 8 8 Packing Annexes A Example of a works certificate for locked coil wire ropes B Example of a full works certificate for locked coil wire ropes 10 for Standardizatior ili No reproduction or networking permited without license from IHS Not for Resale