7222 OSI) International Standard INTE RNATIONAL ORGANIZATION FOR STANDARDIZATION MEXAYHAPOAHAR OPTAHV3AUMA O CTAHAAPTW3AUWWORGANISATION INTE RNATIONALE DE NORMALISATION Shipbuilding - Shipborne barges, series 2 Main dimensions Construction navale - Barges de la série 2 embarcables a bord des navires -- Dimensions principales First edition -- 1985-03-15 UDC 629.122.3 : 629.123.5 Ref. No. ISO 7222-1985 (E) (3) 7222-1985 Descriptors : shipbuilding, ships, barges, dimensions. Price based on 4 pages d without license from IHS Not for Resale Foreword ISo (the International Organization for Standardization) is a worldwide federation of national standards bodies (ISO member bodies). The work of preparing International Standards is normally carried out through Iso technical committees. Every member body interested in a subject for which a technical committee has been established has mental and non-governmental, in liaison with Iso, also take part in the work. Draft International Standards adopted by the technical committees are circulated to the member bodies for approval before their acceptance as International Standards by the ISO Council. They are approved in accordance with ISO procedures requiring at least 75 % approval by the member bodies voting. International Standard ISO 7222 was prepared by Technical Committee ISO/TC 8, Shipbuilding and marine structures. @ International Organization for Standardization, 1985 Printed in Switzerland Noreproductic tted without license from IHS Not for Resale INTERNATIONAL STANDARD ISO 7222-1985 (E) Shipbuilding - Shipborne barges, series 2 Main dimensions 1 Scope and field of application based on the floating-dock principle, the dimensions of the principal constructional elements shall be as specified in This International Standard specifies the main dimensions of table 1. Stationary equipment installed on the deck shall not shipborne barges, series 2 and the dimensions of the principal project beyond the overall height. constructional elements. Tie-down fittings, shown in figure 2, shall be similar in design 2 Definition to such fittings on existing series 2 barges. shipborne barge, series 2 : Barge handled aboard a barge carrier by an elevator or by a system based on the floating-dock principle. Series 2 barges shall have CO2 and fire hose connection devices installed and located similar to those on existing series 2 3 Dimensions of principal constructional barges. elements To ensure interchangeability when stowing and handling Where necessary, adaptors shall be provided to conform to barges aboard a barge carrier by an elevator or by a system existing series 2 barge fittings. Table 1 -- Dimensions of principal constructional elements Main dimensions Distance between the Height at centreline Length of the outboard edge Maximum (without positioning angles) positioning Maximum Length Width of the position- draught angles and displacement overall Depth, ing angle and overall in fresh water Height doubler plates moulded longitudinat overall to deck centreline plane 7 B H H, N T D mm mm mm mm mm mm mm t 29 718 10 706 3. 810 5 165 3 397 27 380 1 024 3 336 Copyright International Organization for Standardization 1 from IHS Not for Resale