BS ISO BRITISH STANDARD 7588-3:1998 Road yehicles Electrical/electronic switching devices 一 Part 3: Microrelays ICS 43.040.10 NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BSIS0 7588-3:1998 National foreword This British Standard reproduces verbatim ISO 7588-3:1998 and implements it as the UK national standard. The UK participation in its preparation was entrusted to Technical Committee AUE/16, Electrical and electronic equipment, which has the responsibility to: - aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; - monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled "International Standards Correspondence Index", or by using the “Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not ofitself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, pages i and i, the ISO title page, page i, pages 1 to 4 and a back cover. This standard has been updated (see copyright date) and may have had amendments incorporated. This will be indicated in the amendment table on the inside front cover. This British Standard, having Amendments issued since publication beenprepared under the direction of the Amd. No. Date Comments Engineering Sector Committee, was published under the authority of the Standards Committee and comes into effect on 15February 1999 CBSI 06-1999 ISBN 0 580 30948 7 BS IS0 7588-3:1998 Contents Page National foreword Inside front cover Foreword ii 1 Scope 1 Normative references 1 3 Definitions 1 4 Dimensions and other requirements 1 5 Functional allocation of the terminals 3 6 Designation 3 Annex A (informative) Dimensions of socket apertures 4 Figure 1 1 Figure 2 2 Figure 3 2 Figure A.1 4 Table 1 3 CBSI 06-1999 1